RICH SOLRA 48V (57.6V) Waterproof LiFePO4 Charger | 20A / 25A, 100-240V AC, 8-in-1 Protection, Fan-Cooled

RICH SOLRA 48V (57.6V) Waterproof LiFePO4 Charger | 20A / 25A, 100-240V AC, 8-in-1 Protection, Fan-Cooled

Ideal for:  Marine/Boating: IP-rated waterproof housing for wet environments.

• Golf Carts: Perfect for 48V (54.7V-58.4V) lithium conversion kits.

• Off-Grid Storage: High-amperage (25A) recovery for large battery banks.

Features

• Fast Charging Performance: Delivers up to 20A or 25A charging current for 48V (57.6V) LiFePO₄ batteries.
  
• 88–93% Peak Efficiency: Maximizes charging efficiency while reducing energy loss.
  
• 100–240V AC Input: Supports worldwide AC input for convenient charging.
  
• 8-in-1 Safety Protection: Includes overvoltage, overcurrent, short circuit, reverse polarity, over-temperature, undervoltage, automatic shutoff, and battery activation.
  
• IP67 Waterproof Housing: Die-cast aluminum enclosure resists water, dust, and impacts for demanding environments.
  
• Active Cooling Fan: Provides efficient heat dissipation for reliable high-current charging.
  
• Two-Color LED Indicator: Displays standby, charging, fully charged, and fault status.
  
• FCC, CE & RoHS Certified: Meets recognized safety and environmental standards.

Industrial-Grade Protection

• IP67 waterproof, dustproof, and shock-resistant die-cast aluminum housing
  
• 8-in-1 safety protection: overvoltage, overcurrent, short-circuit, reverse polarity, overheating, undervoltage, auto-shutoff, and battery activation
• FCC, CE, and RoHS certified for safety, performance, and environmental compliance.

Reliable Power Output

• Selectable 20A or 25A output with an active cooling fan for heat dissipation
• Universal AC input: 100-240V, 50/60Hz for global compatibility

LED Indicator

• Green (Always On): Standby / No Load
• Green (Flashing): Battery is Charging
• Green (Always On): Battery Fully Charged
• Red (Flashing): Charger Fault or Under Protection

How to Connect

1. Ensure the switch is off.
2. Connect the DC output cable to the battery (+ to +, - to -) and attach the Anderson connector.
3. Turn on the switch. The battery is charging when the LED indicator flashes green.
4. Turn off the switch after charging is complete.

Specifications & Downloads

Specifications