5,100Wh of LiFePO4 battery storage.
2,000W (or 3,000W) pure sine wave inverter (PSW).
- 6,000+ charge cycle.
- Advanced BMS.
Movable Power Station.
Seamless 24/7 UPS backup protection from power outages, plug-and-play usability, Uninterruptible Supply.
Off-grid Energy Storage
Multiple Devices Can Be Loaded Simultaneously
Flexible Recharging Way To Keep Your EP500PRO Always On
App Remote Control
24 Months Hassle-Free Warranty
Check the FREE Gifts
*Please NOTE: This item is only applicable to orders in the US (except Alaska and the Virgin Island.
In the case of a power outage, we'll be there for you
Let's be honest. A power outage will affect everyone, and it will be a major nuisance. You can't cook or use your phones, tablets, or laptops since you can't charge them. Even worse, if you can't power crucial medical devices, your family's life might be jeopardized.
You can't plan for the unexpected, but you can plan for it. It's past time for you to take charge and make a difference. It's for this reason that Bluetti has arrived. The EP500 Series Power Station is now available.
It can help you save money while while protecting the environment
Can it just be utilized in the event of a power outage? Certainly not!
You may help offset some of your home's electricity use by installing roof solar panels or portable solar panels. You can not only save money on your electricity bills, but you can also feel good about helping the environment by utilizing clean and free solar energy.
The BLUETTI EP500/Pro has a LiFePO4 battery storage capacity of 5,100Wh, as well as a 2,000W (or 3,000W) pure sine wave inverter that can provide all the power you need to keep your most important and crucial equipment functioning. Split Phase Bonding, continuous 24/7 UPS backup protection against power outages, plug-and-play usability, App remote control, and a 6,000+ charge cycle are also included. Providing you with peace of mind and control while your neighbors are in a panic due to a lack of food and power.
There are many different types of energy storage systems available, including fuel generators, lead-acid battery generators, and lithium batteries. What are the advantages of working with us? We'll explain why as you scroll down!
When compared to lead-acid batteries, lithium-ion batteries are more cost-effective
We have a large selection of lithium iron phosphate (LiFePO4) batteries, which are the safest lithium battery type on the market right now. Each battery has been designed to provide long life cycles and outstanding performance throughout a wide range of operating conditions and temperatures.
In comparison to fuel-powered generators
The EP500 is a fume-free and silent alternative to standard generators. Our battery-powered generators lower your carbon footprint and offer flexible indoor/outdoor operations by emitting no hazardous pollutants.
No Extra Cost on Fuel
In comparison to Power Stations
Current backup power stations can only handle low-power equipment, have significant recharge periods, and only offer a few functions.
The EP500 Series is a versatile power station that may be used in a variety of situations
Movable Power Station
Because it’s meant to be portable and mobile, not something stuck to your wall or garage. The EP500 Series is a "no Installation needed" plug-and-play product that can easily be moved to the desired location when needed.
UPS Mode (In-Grid)
A qualified certified electrician installing the BLUETTI UPS Box (Sub Panel) will be able to wire up a dedicated circuit to link your EP500 or EP500 Pro to the building's main switchboard. Everything from lights in high-traffic areas and refrigerators to medical equipment, internet modems, and other electronics is powered.
Flexible UPS Mode
The UPS capability comes in helpful in the event of a power loss. When the EP500 Series senses a power outage, it immediately switches to standby mode, allowing a computer or other critical utilities to continue operating.
Off - Grid Energy Storage
Pair your BLUETTI EP500 Series with your roof solar panels to go fully off the grid.
Multiple Devices Can Be Loaded Simultaneously
Traditional lithium batteries can only carry very few devices. Your BLUETTI EP500 Series are completely different. With 2000 (or 3000W) output, the EP500 Series can load devices simultaneously. Isn’t it spectacular!
Power outages can happen to anyone, anytime, and they can last days. Small portable batteries are mostly pointless during such times, as they don’t support high-powered appliances, nor will they last very long. To ensure you have power for days, you must have a large capacity battery, such as EP500 Series which is engineered with a 5100W large battery capacity.
Flexible Recharging Way to Keep it Always On
P500 Series can be powered by a variety of power sources, including AC charging, solar panels, and so on. This way, you can access the most convenient power sources when you need.
From The Wall
Throw away the big bricks, just using the included AC charging cable to recharge this battery pack through the AC input port. For EP500Pro, the charging speed depends on the ampere and voltage of the wall socket.
From The Sun
Use the earth’s best natural resource to top up! With a solar input and MPPT control up to 2400W (1200W for EP500), the EP500 Pro can be fully charged fast and safely in 2.6hrs and 4.75hrs for EP500.
MPPT stands for "Maximum Power Point Tracker," and a unit comes pre-installed on the EP500 Series. You'll get up to 40% faster charging than a standard charging port, and you'll see your most significant efficiency gains when solar charging.
AC + Solar charging & Dual AC Charging
Still want faster charging? No problem, we’ve got you covered. This class-leading unit can be recharged by using the AC + PV input port simultaneously.
- Recharge via solar and AC power simultaneously, you’ll get a maximum of 4000W input power.
- Recharge via dual AC power simultaneously (One AC charging cable and one BLUETTI T500 AC adapter
Multiple Charging Outputs Provide More Options
Single application energy storage systems, such as a Tesla Powerwall, are a thing of the past. The EP500 offers a wide range of powering options with seven versatile ports, including four industry-leading 2000W AC ports to run anything you could from a wall outlet. Power RV’s, trailers, off-grid events, worksites, essential circuits in your home, and more you might need to charge.
Split Phase Bonding Function
As an emergency energy storage power for the whole family, Bluetti has a pretty cool option to double the AC output and storage capacity. For higher power loads, Bluetti is releasing its own “BLEUTTI Split Phase Box.” Users can connect two EP500s in tandem to double the rated 4000-watt power output and double storage capacity with this accessory board. The Split Phase Box will also offer 220/240-volt output options to power 220-volt appliances. The high power output means you can now run your home air conditioner, clothes dryer, in-wall Electric Heater, Mining machine and other high power appliances with ease. No need to worry about power outages on hot summer nights or cold, bitter winters anymore.
Moreover, it can also be connected to the home grid in the Split Phase Bonding state.
1- Split Phase Bonding Function ONLY valid for the US plug version.
2- Split Phase Bonding Function Requires TWO EP500s and the SPLIT PHASE FUSION BOX.
3- During the use of the Split Phase Bonding Function, if one of the EP500/EP500/Pro is out of power, the Split Phase Bonding Function will not be valid.
Peak Load Shifting
The EP500 Series can reduce your electricity bill by helping you manage your power efficiently. For example, you can charge the battery during off-peak hours, when electricity prices are lower. Then during peak hours, use the EP500 Series for your power needs. When connected to a private power station like a photovoltaic system, you can build a 24/7 operable private power network.
Control Power in The Palm of Your Finger- App Control
Monitor, control, and optimize your power usage from anywhere with the BLUETTI app, which offers remote control of power in/out, real-time power consumption notifications, and charging profiles to maximize your battery life. Moreover, you can enjoy the latest firmware update over Wi-Fi directly.
Most of the power stations didn't pay enough attention to the Human Machine Interface. EP500 Series comes with a smart touchscreen that simplifies the workflow of your daily projects, letting you manage the most-used tasks directly from the touchscreen.
All-in-one Backup Power Station
The BLUETTI EP500 is shipped with a ground-breaking 5100Wh LiFePO4 battery pack and a 2000W rated (3000W for the EP500 Pro) pure sine wave AC inverter. This class-leading power station brings you the power to run your entire party, family camping trip, cabin workshops, or even your whole house for a day or two in the event of an unexpected outage. Up to 15 outlet sources allow you to power anything from laptops and air conditioners to your electric vehicles without breaking a sweat.
Safe, Smart, And Continuously Evolving
The advanced Battery Management System and LiFePO4 chemistry bring the EP500 incredible safety and durability. With the built-in dual-core microcomputer and Internet connection, the EP500’s firmware can be upgraded through your internet connection. There is no best, only better!
Seamless UPS Backup
The EP500 will automatically become your home energy source for essential loads when the electrical grid goes down. Unlike gasoline generators, the BLUETTI EP500 keeps your lights on and laptops charged without upkeep, fuel, carbon monoxide or annoying noise. Pair with up to 1200W MPPT solar input to rapidly recharge or to keep your appliances running without depleting the onboard battery. Remember when you had to worry about a power outage? Worry no longer, Meet BLUETTI EP500.
In developing the EP500 Series, we prioritized product safety above all else, backed by multiple layers of protection. Regardless of circuit design, software programming, material selection, production process, testing and packaging, we have taken every precaution to ensure the product is safe under all conditions.
Strict In Each Step
We feel the most significant driver behind our continued growth is our focus on providing the highest quality products, coupled with the best service in our industry.
Our strict quality requirements mean that suppliers must meet numerous preconditions before cooperation. All our manufacturers undergo comprehensive auditing to determine whether they live up to our high standards and requirements.
Every BLUETTI product we built is a premium-quality product produced with the finest materials and to the highest standards. It’s a product you will be proud to own. Before shipping, all products undergo strict quality assurance tests with a focus on product construction and performance.
Modern times require modern technology. Thanks to the unique BLUETTI technology, the EP500 Series is far more powerful than you think.
With a high-efficiency monocrystalline solar cell, you will get greater power efficiency even though the panel is smaller than a traditional model. This model maximizes system output by reducing mismatch loss.
In addition, the solar panel folds up neatly into an easy-to-carry, 14.3-pound unit with a handle and a zippered pocket to hold cables. Around the back, you’ll find adjustable kickstands, which allow you to angle the panels towards the sun across a range of positions for maximum energy absorption.
AC Rated Power:
|(peak 4800W)||(peak 6000W)|
|≈76kg (167lbs)||≈83kg (182lbs)|
Battery Cell Type:
Rated Life Cycle:
|0°C ~ 40°C (32°F ~104°F)|
|minus20°C ~ 40°C (minus4°F ~104°F)|
Storage Ambient Temperature:
|0°C ~ 45°C (32°F ~113°F)|
Working Environment humidity:
|PSE, FCC, CE, UN38.3, msds, UL, SAA and ROHS|
|Superior Grey, Elegant White|
|600W Max, 100-264VAC||3000W Max|
PV Input or T500 Input:
|1200W Max,||2400W Max,|
|55-145VDC, 20A||35-150VDC, 12Ax2|
|2*Quick Charging, 36W Total, 2*5VDC, 3A Total|
RV (Aviation Port):
|2*12VDC, 10A Total|
Wireless Charging Pad:
What’s in the box
Q: In-Grid UPS Setup Guide?
1) For non-solar-powered household circuits:
An electrician with a professional technician certificate is required to install the in-grid power system, connect the wires of critical equipment from your main electrical box to the BLUETTI UPS BOX. When the power fails, it will automatically switch to EP500 or EP500 Pro for the power supply. The connection method: power grid--home main circuit--BLUETTI UPS box--EP500 or EP500Pro--critical equipment (such as refrigerator, electric light, and server).
2) Solar-powered UPS:
- 1. If the open-circuit voltage of the solar panels is within the specified input range of EP500, they can be directly connected into EP500 or EP500Pro through the MC4 port connectors to build up the UPS system.
- 2. If the open-circuit voltage of your panels exceeds the input limitation of EP500 or EP500Pro, they need to pass the "PV step-down module" to decrease the voltage before connecting into the system. The connection method is solar panels--PV step-down module--EP500 or EP500Pro--critical equipment (such as refrigerator, electric light, and server).
Q: Why is there a limitation on the power of the equipment loaded by the US version of EP500 or EP500Pro in the mobile UPS mode?
A: When EP500 or EP500Pro is plugged into a home wall outlet, the power output will be limited by the current of the wall plug.
The power of output is subject to:
If your home's socket features 120V/15A, the equipment carried by EP500 or EP500Pro cannot exceed 1800W.
If your home socket features 120V/25A, then EP500 load equipment can be no more than 2000W, and EP500Pro can be 3000W for safety.
Q: Can I change the working mode of EP500 or EP500Pro to work as a mobile UPS after the EP%)) connected to the home grid?
A: Yes, you can. Turn off EP500 or EP500Pro first, and then unplug the cable on it, remind to set the Max. Grid Current to 15A.
Q: What is the UPS switching time?
- No delay for online UPS.;
- 20ms from standby UPS.
Q: How much is the loss of AC and DC?
- In standby state: less than 10W,
- AC_ON & DC_OFF: less than 20W,
- AC-ON & DC_ON: less than 25W
Q: After the stated 600 battery cycles, how much capacity is left in EP500 and EO500Pro?
A: EP500 and EP500 Pro can maintain above 50% capacity after 6000 cycles.
Q: What's the frequency?
- 60Hz: US, Canada
- 50Hz: Europe, UK, Australia
- Frequency 50/60Hz cannot be switched.
Q: What should I do if the solar panels on the roof of my house exceed the open-circuit voltage requirement?
A: You can reduce the open-circuit voltage by ordering a BLUETTI PV Voltage Drop Modular. Doesn't require changing the original installation and connection method of solar panels in your house. Through this modular, the open-circuit voltage of roof panels can be matched with the input specs of EP500/EP500Pro
Q: Can I use a third-party solar panel and what conditions need to be met?
A: Yes, you can. However, it must meet:
1)Open Circuit Voltage(OCV):
- EP500: 55-145V/Max.20A, Max.1200W.
- EP500Pro: dual MPPT，each is 35-150V/Max.12A,1200W Max. (2400W Max. For dual connection).
2)Suitable MC4 connector.
3)We recommend that the solar panels to be connected should be of the same brand.
Q: Are there any restrictions on the use of the 100W USB-C port?
A: The charging power will work at only 60W at most instead of 30W if the USB-C cable does not have 5A MFI certification.
Q: Are the DC port of 12V 30A is opened, can the other DC ports be used?
A: No, for the 30A large-current, the other ports besides 12V/30A RV ports won`t work. In addition, you must cover the rubber plug when the DC is turned on and the 12V/30A port is idle, otherwise, it may cause a short circuit if the cable falls in.
Q: Note on the output power of the Split Phase Bonding Function?
- 1) There is only one AC port marked 4000W/220-240 (or 6000W/220-240) on the Split Phase Fusion Boxes that can power the High-voltage devices. Other 6 AC ports cannot load more than 2000W on EP500 (3000W on EP500Pro).
- 2) Under Split Phase Bonding mode, the total load power of all AC ports (on the machine and Split Phase Fusion Boxes) can not exceed 4000W for EP500 (6000W for EP500Pro).
Q: if One of the EP500 or EP500Pro is out of power, does the Split Phase Bonding Function continue to work?
A: If any one of the two EP500(or EP500Pro) runs out of power, the high-voltage output ports on the Split Phase Fusion Boxes will stop outputting power. The machine which still has the power needs to be set to ”Single Phase” mode manually.
Q: Does the Split Phase Bonding Function apply to one EP500 and one EP500 Pro?
A: No. Only applicable to units of the same model and specifications. For example, two EP500 or two EP500Pro are recommended. Besides, the Split Phase Fusion Boxes also are different.
Q1: What can the 200W Solar Panel Charge?
1pcs BLUETTI 200W solar panel can quickly charge the BLUETTI EB55 within 3.5-4hrs.
1pcs BLUETTI 200W solar panel can quickly charge the BLUETTI EB70 within 4.7-5.2hrs.
2pcs BLUETTI 200W solar panels can quickly charge the Bluetti EB150 about 5.5-6 hours by connecting them in series.
2pcs BLUETTI 120W solar panels can quickly charge the Bluetti EB240 about 9-9.5 hours by connecting them in series.
3pcs BLUETTI 120W solar panels can quickly charge the BLUETTI AC200P within 4.5-5 hours by connecting them in series.
3pcs BLUETTI 200W solar panels can quickly charge the BLUETTI AC200Max within 4.4-5hrs by connecting them in series.
6pcs BLUETTI 200W solar panels can quickly charge the BLUETTI AC300+*2B300 within 6.5-7hrs by connecting them in parallel.
Besides the BLUETTI power station (AC200P, AC50S, EB240, EB150, AC20, AC200MAX, AC300), it can also be used with Baldr/Jackery/Goal Zero/PaxcessRockpals, AIMTOM, JACKERY If you have your own adapter (need to buy adapter yourself).
which means that if the total power of your devices exceeds 700W.
Q2: Is THE 200W Solar Panel Waterproof?
Yes, IP65 is rated for junction boxes, but do not expose it to constant rain or snow.
Yes, IP65 is rated for junction boxes, but do not expose the solar panels to rain or snow. Tips: The charging time is affected by many factors: such as the sunlight intensity and the panel's angle put on the ground. The 200W of solar is tested in an ideal laboratory. However, the intensity of the sunlight constantly changes. In addition, the angel of sunlight to the solar panel also changes with the rotation of the sun.
Warranty & Registration
This warranty gives you specific legal rights, and you may have other rights that vary from state to state (or by country or province). other than as permitted by law, BLUETTI does not exclude, limit or suspend other rights you may have, including those that may arise from the nonconformity of a sales contract. for a full understanding of your rights, you should consult the laws of your country, province, or state.
General Warranty period (month)
Warranty period for AC200 Indiegogo backers (month)
BLUETTI’s warranty does not apply to:
Misused/abused/damaged by accident/damaged due to acts of nature. (For example lightning strikes, tornadoes, hurricanes, and such)
Unauthorized modification/repair/dis-assembly or operation not in accordance with the official instructions or manuals;
Non-quality related issues
Items purchased from unauthorized resellers
Used for a special application other than normal consumer use
Lost /stolen/free/refunded product
Any defects or damages caused by exposure to excessive heat, cold, liquids or other external causes.
Not able to provide valid proof of purchase
Register Your Product
How to claim a warranty?
Feel free to contact our customer service team at email@example.com.
Shipping, Return & Refund
Thank you for visiting and shopping at ecopowerit.com. aims to offer you the best shipping options.
Shipment processing time
All orders are processed within 3-5 business days. Orders are not shipped or delivered on weekends or holidays.
If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in the shipment of your order, we will contact you via email.
Shipment to P.O. boxes or APO/FPO addresses
ecopowerit.com ships to addresses within the U.S., some of U.S. Territories (Please consult Sales@ ecopowerit.com before ordering) and does not ship to P.O. Box and APO/FPO/DPO addresses.
Shipment confirmation & Order tracking
You will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 24 hours.
ecopowerit.com is not liable for any products damaged or lost during shipping. If you received your order damaged or lost your package, please contact us within 20 days at firstname.lastname@example.org.
We offer a 30-day hassle-free money-back guarantee
Generally speaking, if the customer receives the product, contact us to return it. After the customer returns the goods, we will refund the customer for about 4-7 working days. we will refund your order directly from the backend of the Shopify website or via PayPal.
Please note-30-Day a money-back-guarantee is not applicable on unpacked/used products. Please make sure the package is in good condition and will not affect the re-sale. In addition, the shipped orders and cannot be refunded during transportation.
Valid Proof of Purchase
Order number of purchases made through EcoPowerit.com direct.
Sales invoice or order confirmation email that clearly shows the description of the product and its price.
Please note that more than one type of proof of purchase may be required to process a warranty claim (such as receipt of money transfer and confirmation of address item was originally shipped to).
*The defective item’s serial number (usually on the bottom of the product) and/or visible proof (eg. Short video) depicting the defect will be required.
How to Return/Replace/Repair an Item
Contact info@ EcoPowerit.com, for a Return Merchandise Authorization (RMA) Number. BL EcoPowerit.com will not accept returned items without prior authorization and RMA.
Write the RMA number on the shipping label outside the
*RMA numbers should be clearly displayed on the shipping label of the returned package. Do not write the RMA number directly on the box. Packages without an RMA number on the return shipping label may not be accepted by our local warehouse.
BLUETTI will repair/replace (at BLUETTI’s expense) any faulty products during the warranty period. A replacement resumes the warranty period left of the original order.
We will proceed with replacement in 14 business days after confirming that the defective item is received at our warehouse. The final resolution is subject to the availability of the replacement items.
Shipping costs should be paid by the customer in the following situations:
Returning products without any proven defect.
Warranty claims on items taken outside the original country of purchase.
Returning items claimed to have defects but were found to be in proper functioning status by BLUETTI.
Costs related to unauthorized returns (any returns made outside of the approved warranty process)
After-sale Service Contact
BLUETTI is so much more than just a brand name; it is a way of life, a design philosophy, our hope for a better earth, a blue sky, and much more.
From a single idea - a portable, powerful source of electricity - we've built out a whole line up of solar power storage products for adventurers and all kinds of off-grid lives. Along the way, some core values that unite the entire BLUETTI community have defined everything we do. We value resourcefulness, seeking adventure, and living free in any way we want. We believe that the personal power storage products are the 21st century equivalent of swords: tools that everyone can wield and get Energy Independence with. Consequently, we build products to ensure that your power is there whenever and wherever you need it.
After a decade of working and researching in the energy storage industry, in the summer of 2019, Wondar Law & James Ray met in Walnut, California, and set out with a vision of creating a minimalist portable power station that would seamlessly integrate into everyone's life. The EB150 and EB240, Bluetti's first products, launched on Amazon.com In July 2019 and have been well received ever since. One year later, we released our flagship model AC200 on Indiegogo as a crowdfunding project and pulled nearly 7 million dollars in two months. At the same time, after bouncing around from Los Angeles to Denver, we are finally settled down in Vegas, Nevada, where we’re headquartered now.
Commitment to Product
Bluetti is and always will prioritize design, service, and quality over everything else. One of the most important aspects to us when designing new products is that we use the highest quality, longest-lasting materials available. We design all of our parts from the ground up, rather than white-labeling existing products. From the BMS motherboard to the MPPT controller and inverters, we choose materials that stand out and outlast. It costs more to do so, but the cost isn't as important as the value that doing so creates.
- James Ray, Chief Officer of Product
Looking forward to 2021 and beyond, BLUETTI will continue to innovate the renewable energy world with new products and new concepts, while at the same time keeping true to our roots that go all the way back to a dream that started with one battery, two friends, and the community.
We are eternally grateful to our original backers and there is nothing I like more than running into someone who supported us on Indiegogo and Amazon and hearing about their experience with our products. What is even more meaningful to me is that many of those people have remained BLUETTI customers to this day.
- Wonder Law, Founder & CEO
A Word From Our Founders
We've always thought of BLUETTI as a "big-yet-little company", meaning that whatever we do, we do it well and with the same passion like we had on the first day when we embark on the road. As time goes by, we've indeed gotten a little bigger, but we never forget to remain true to the original aspiration.
Everything started with a simple idea, with the help from our friends and supporters, energy independence for every family is gradually becoming a reality. We look forward to continuing this journey with you, our dearest fellow BLUETTI families.
- Wonder & James, BLUETTI Co-Founders