BLUETTI| 2*EP500 + 1*Split Phase Fusion Box | Home Battery Backup

• Q1: How much power can the EP900 provide?

EP900 can provide up to 9kW output. Please note that when you combine 1 EP900 and 2 B500 units, the system can only provide a maximum of 7.6kW of power.

• Q2: What is the battery life of the EP900?

Based on the battery's throughput, we guarantee a minimum of 15.48MWh per battery pack.

• Q3: What is the noise level of the EP900?

Less than 50dB.

• Q4: What is the maximum solar input of EP900?

It depends on how many B500 battery packs you connect to it. Numbers of B500 Battery Packs Max. solar Input 6,000W 2 9,000W 3/4

• Q5: How can I recharge the EP900?

You can recharge it via your rooftop solar panels or home grid.

• Q6: Can I charge the EP900 via solar and grid power simultaneously?

Yes, the EP900 accepts both solar and grid power simultaneously, with a maximum input of 9kW. Note that the system always prioritizes charging with solar energy.

• Q7: If I already have a solar system and inverter at home, can I use them together with the EP900?

Yes, you can. Please provide us with the power and voltage details of your current system so we can help you plan a suitable installation.

• Q8: Can the EP900 prioritize solar power usage?

Yes, the EP900 comes with an intelligent energy management system that allows you to set charging and discharging times, as well as the SoC limits, to maximize the use of solar energy and minimize your electricity bills.

• Q9: How many MPPT channels does the EP900 have, and how many solar panels can be connected to it?

The EP900 has dual MPPT controllers that can handle up to 3,000W and 6,000W of solar input separately. To determine how many solar panels you need, refer to the full specifications of the panels. Each MPPT channel of the EP900 supports a voltage range of 150V-500V and a maximum working current of 12.5A.

• Q10: Can I program the EP900 to charge and discharge according to my energy usage patterns and needs?

Yes, you can set a charging and discharging schedule in the BLUETTI App.

• Q11: Is it possible to add additional battery packs to the EP900 after it has been installed?

Yes, but additional installation fees may apply. We recommend that you plan in advance for all your power needs.

• Q12: Can I control the EP900 via the App?

Yes, with the BLUETTI App, you can control and monitor your EP900  from anywhere, anytime.

• Q13: Will the failure of the EP900 affect the normal supply of my home?

No, the system comes with a maintenance switch that can be manually triggered to switch back to grid power.

• Q14: Can the EP900 be used with battery packs other than the B500, such as the B300, B300S, or B230?

No, the EP900 only accepts B500 battery packs now.

• Q15: What's the power consumption in standby mode?

It's about 50 watts.

• Q16: Does it have an energy-saving ECO function?

Yes, you can enable ECO mode in the BLUETTI App.

• Q17: What is the switching time for the UPS feature?

In 10ms.

• Q18: Do I need to purchase any additional accessories or components to install the EP900?

Possibly, it depends on your specific installation requirements. Please consult with your installer for more details.

• Q19: What is the weight capacity of each unit?

The B500 battery pack can support a weight of over 441 lbs/200kg, allowing you to stack up to 4 battery packs or 3 battery packs with an EP900 unit. And this won't affect heat dissipation.

• Q20: Is it necessary to ground the EP900 unit?

Yes, grounding the EP900 unit is necessary for safety reasons and to ensure proper functionality.

• Q21：Can the EP900 charge electric cars?

Yes.

• Q22: Is the EP900 a hybrid system?

Yes.

• Q23: Can I install the EP900 unit by myself?

No, the system should be installed by a licensed electrician, and we highly recommend our authorized installers.

• Q24: Can the EP900 be used as backup power for medical equipment?

No, the EP900 is intended for home use only.

• Q25: How can I check the operation status of the EP900?

You can check the basic system information from the EP900's indicators, and learn more on the App.

• Q26: Are the EP900 and B500 waterproof and dustproof?

They have an IP65 rating to protect them from water-resistant and dust.

• Q27: What kind of warranty do the EP900 and B500 come with?

The EP900 unit and B500 battery pack come with a 10-year warranty, while consumable accessories such as fans and WiFi modules have a 3-year warranty. Paid maintenance is available after the warranty period expires.

• Q28: What should I do if there are quality issues during the warranty period?

Simply submit a maintenance request on the BLUETTI App, providing a brief description of the issue, your address, and contact information. Our team will contact you and arrange an on-site inspection and maintenance.

• Q29: Does BLUETTI offer product liability insurance for its products?

Yes, we have purchased third-party product liability insurance worldwide.

• Q30: Is the EP900 risky or prone to catching fire?

The EP900 is designed to prioritize safety and reliability. However, it's essential to take certain precautions to maintain its longevity. Please keep the device away from heat sources like heaters and fire, avoid exposing it to direct sunlight, and prevent severe impacts or contact with chemicals. Please note that any accidents resulting from these situations are not covered by the manufacturer's warranty.

Yes. Once connected via WiFi or Bluetooth, the BLUETTI App will enable you to control the EP500ProPro remotely, like switching the working mode and upgrading the firmware.

Yes. It supports four UPS modes: 
1. Standard UPS. 
2. Time Control UPS (Pay less for higher electricity consumption).  
3. PV Priority UPS (Recommended for regions with sufficient solar energy). 4. Customized UPS.

BLUETTI recommends a competent and trained licensed electrician undertake the task.Connect the wires of critical equipment from your house electric panel to BLUETTI Smart Home Panel*.Then connect EP500Pro to the Smart Home Panel.* Sold separately.

There are two types of working conditions of UPS for EP500Pro system. 
1) No delay for online UPS; 
2) 20ms from standby UPS.

4,000W Max.

Based on the battery's throughput, we guarantee a minimum of 15.48MWh per battery pack.

PV input requirements for EP500Pro: 
Open Circuit Voltage: 35-150V 
Input Power: 2,400W Max. 
Include MC4 connectors. 
Highly Recommended: 
6x BLUETTI PV120: ≈8hrs*. 
5x BLUETTI PV200: ≈6hrs*. 
3x BLUETTI PV350: ≈5.5hrs*. 
* For reference ONLY.

Yes, but please note your solar roof should have:1. NO micro-inverter2. an open-circuit voltage of 35-150V3. MC4 connectorsHowever, when the OCV falls in 150-550V, you can also use BLUETTI D300S* to step down the voltage and achieve solar charging.* Sold separately.

Yes. With the Fusion Box (P030A), you can connect two EP500Pro in series for 240V/6,000W output.

No. Only EP500 to EP500, or EP500Pro to EP500Pro is acceptable.

Yes.

Calculate the total wattage of your devices. EP500Pro should work if the load doesn't exceed its rated 3,000W.

Running time = Battery capacity × DoD × η ÷ Device rated power 
DoD refers to Depth of Discharge and η is local inverter efficiency. 
For EP500Pro, both DoD and η are 90%. If you run a 1,000W microwave oven with it, the running time will be: 
5,100Wh × 90% × 90% ÷ 1,000W ≈ 4.1hrs Note: 
1) The formula is NOT suitable for inductive loads with compressors, like refrigerator, air conditioner, etc. 
2) The above data is for reference ONLY.

No. Also, please do NOT store it in a humid environment for a long time.

Yes. And when the SOC is less than 100%, EP500Pro will automatically charge again without damage to the battery.

No. If the internal battery pack is faulty or even dead, please contact BLUETTI Customer Service.

The main differences are:1) Output power : 3,000W AC power for EP500Pro, while 2,000W for EP500.2) Solar Input: 2,400W for EP500Pro, while 1,200W for EP500.3) AC Input: 3,000W for EP500Pro, while 600W for EP500.4) Output Port: EP500Pro has one more 100W USB-C port and 1 NEMA L14-30 port.5) Recharging: EP500Pro supports charging from car cigarette lighter and lead-acid battery, while EP500 doesn't.

The main differences are: 1) Battery: AC300 has no built-in battery and must work with B300, while EP500Pro connects with B300 only for capacity expansion. 2) 30A AC Output: EP500Pro has an L14-30 port while AC300 has a TT-30 port. 3) Maximum Input: 5,400W for AC300 with two B300, 3,000W with one B300, while 4,000W for EP500Pro. 4) Weight and Dimensions: AC300 is smaller.