200-800W 12V Poly Solar With MPPT Charge Controller 20-60A RV Kits
ACOPower RV Solar Kits are carefully arranged to meet your RV needs. Offers many benefits for homes, RVs, trailers, boats, sheds and cabins, Incorporating a small off-grid power system can give you greater travel independence and potential power cost savings. Going off-grid has never been easier!
Taking a trip in your RV can create lifetime memories. Don"t let traditional gas powered generators or power hookups slow you down. ACOPower 600W/800 Watt 12 Poly Solar RV Kit silently recharges your batteries so you can enjoy the great outdoors without the extra noise. Solar panels also allow you to run limited low watt electrical equipment without a power hookup.
This solar kit conveniently includes All the tools necessary for a new system
Poly Solar Panels
MPPT Solar Charge Controller
Solar Panel Mounting Z Bracket - for RV Boat Off Gird Installation
12AWG Bare wire-PV Extension Cable
8AWG 8ft Tray Cable
Waterproof Cable Entry Gland Box for RV, Boats, Caravans, Marine
Solar Y Branch Connectors
M/FFFF + F/MMMM Y Branch Parallel Adapter
Kick-start your solar adventure with a ACOPower Kit.
KEY FEATURES
- Easy installation: With pre-drilled holes; each solar panel comes with 12AWG cable with MC4 male/female quick connectors
- Height Efficiency: Polycrystalline solar cell efficiency: 14.35%; MPPT charge controller peak efficiency: 99.5%
- MPPT Technology: Solar Charge Controller has user adjustable settings! LCD Screen shows, voltage, solar panel status, battery state of charge, and DC load draw. See Image in photo gallery for all LCD Screen readouts. Compatible with lead acid, AGM, gel, and lithium batteries
- Green Solar System: : Designed for RVs, cabins, homes, boats, back-up and remote power use. The two solar panels can be wired in parallel for 12V battery charging or in series for 24V battery charging
- Common Negative grounding design
- Warranty: 25-year transferable power output warranty on panels and 1-year warranty on rest of the kit components
- Multiple packages: Order will be delivered in multiple package
200W-20A
Solar Starter Kit:200W solar panel kit is fully equipped, and the necessary accessories from input to output are covered in it, which is ideal for novice and customers who are looking for convenience. This solar kit includes 2pcs 100W poly solar panel, 20A charge controller, 2 sets mounting z bracket, 30ft 12AWG PV cable, 8ft 8AWG tray cable, cable entry housing, 1Y2 branch connector.
Ideal Choice for Permanent Installation:Advanced laminated technology and long-lasting ETFE material of 100W polycrystalline solar panel supports high light transmittance, scratch-resistant and easy to clean. And anti-reflection tempered glass and corrosion-resistant aluminum frame reinforces safety and impact resistance, which allows each panel to withstand high wind (2400Pa) and snow loads (5400Pa). Solar panel for homes is perfect for permanent or semi permanent installation.
Small Size Big Service:20A PWM charge controller with smaller size than MPPT is more suitable for small off-grid system, which is compatible with Lithium-ion, LiFePO4, LTO, Gel, AGM, Flooded, Crystal and Calcium. Solar controller supports 12V/ 24v auto continuous charging capacity, and its 5 stages of charging assures devices a 100% return of capacity and longer battery life.
Wide Application & Compatible:Solar panel kit is designed for RV, cabin, rooftop, caravan, shed, greenhouse, boat, back-up and remote power use, which can be connected in parallel for 12V battery charging or in series for 24V battery charging. And compatible with lead acid, AGM, gel, and lithium batteries. 20A PWM of 200 Watts RV kit allows expansion to 720W in series and 360W in parallel.
KEY FEATURES
- Easy installation:With pre-drilled holes; each solar panel comes with 12AWG cable with MC4 male/female quick connectors
- Hight Efficiency:Polycrystalline solar cell efficiency: 14.35%
- 20A PWM Charge Controller: 8 Battery Type Compatible -Lithium-ion, LiFePO4, LTO, Gel, AGM, Flooded, Crystal and Calcium. 20 amps 12V/ 24v auto continuous charging capacity, enables use of up to 12V/360watts, 24V/720watts.
- Safe Operation:The ACOPower is equipped with multiple electronic protections; overcharge, overload, short-circuit and reverse polarity protections.
- Reliable Performance:Electroluminescence tested solar modules for quality assurance.Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments.Corrosion-resistant aluminum frame for extended outdoor use.TPT back sheet dissipates excess heat, ensuring smooth output
- Warranty: 25-year transferable power output warranty on panels and 1-year warranty on rest of the kit components
- Green Solar System: Designed for RVs, cabins, homes, boats, back-up and remote power use. The two solar panels can be wired in parallel for 12V battery charging or in series for 24V battery charging
Tech Specs
ACOPOWER 100 WATTS POLY SOLAR PANEL
Maximum Power at STC (Pmax): 100W | Open-Circuit Voltage (Voc): 22V |
Maximum Operating Voltage (Vmp): 17.48V | Short-Circuit Current (Isc): 6.21A |
Maximum Operating Current (Imp): 5.72A | Operating Temperature: -40ºC to 85ºC |
Dimension: 1020x670x35mm / 40.2x26.4x1.4 in | Weight: 9.5kg / 20.6 lbs |
ACOPWER 20A MPPT SOLAR CHARGE CONTROLLER
Nominal system voltage: 12/24VDC Auto | Rated charge current: 20A |
Battery input voltage range: 8V~32V | Max.PV open circuit voltage: 100VDC |
Max.PV input power: 12V/260W, 24V/520W | MPP voltage range: V(BAT+2V)~72V |
Working environment temperature: -25℃~+50℃ | Storage temperature range: -35℃~+80℃ |
Grounding: Common negative | Communication: RS485 (RJ45 interface) |
Power Terminals: 6AWG(16mm2) | Enclosure: IP30 |
Dimensions: 220X154X52mm | Weight: 1.1kg |
WARRANTY INFORMATION
Panels: The solar panel itself comes with a 5-year workmanship warranty and a 25-year 85% output warranty.
Solar Charge Controllers: The controller itself comes with a 1-year warranty.
Accessories: 1-year material warranty
This solar kit includes:
2 pcs 100W poly solar panel
20A PWM charge controller
1 set mounting z bracket
30ft 12AWG PV cable
8ft 8AWG tray cable
Cable entry housing
1 pairs 1Y4 branch connector
User Manual
200W-30A
Solar Starter Kit:200W solar panel kit is fully equipped, and the necessary accessories from input to output are covered in it, which is ideal for novice and customers who are looking for convenience. This solar kit includes 2pcs 100W poly solar panel, 30A charge controller, 2 sets mounting z bracket, 30ft 12AWG PV cable, 8ft 8AWG tray cable, cable entry housing, 1Y2 branch connector.
Ideal Choice for Permanent Installation:Advanced laminated technology and long-lasting ETFE material of 100W polycrystalline solar panel supports high light transmittance, scratch-resistant and easy to clean. And anti-reflection tempered glass and corrosion-resistant aluminum frame reinforces safety and impact resistance, which allows each panel to withstand high wind (2400Pa) and snow loads (5400Pa). Solar panel for homes is perfect for permanent or semi permanent installation.
Monitor & Protect Devices:30A MPPT uses maximum power point tracking technology and automatically regulates charging profiles relative to ambient temperatures, providing the best level of charge in any condition and protecting against over-charge, over-discharge, overload, and short circuit. User programmable for battery types, load control etc, via PC software or remote meter MT-50.
Wide Application & Compatible: Solar panel kit is designed for RV, cabin, rooftop, caravan, shed, greenhouse, boat, back-up and remote power use, which can be connected in parallel for 12V battery charging or in series for 24V battery charging. And compatible with lead acid, AGM, gel, and lithium batteries. 30A MPPT of 200 Watts RV kit allows expansion to 780W in series and 390W in parallel.
Tech Specs
ACOPOWER 100 WATTS POLY SOLAR PANEL
Maximum Power at STC (Pmax): 100W | Open-Circuit Voltage (Voc): 22V |
Maximum Operating Voltage (Vmp): 17.48V | Short-Circuit Current (Isc): 6.21A |
Maximum Operating Current (Imp): 5.72A | Operating Temperature: -40ºC to 85ºC |
Dimension: 1020x670x35mm / 40.2x26.4x1.4 in | Weight: 9.5kg / 20.6 lbs |
ACOPOWER 30A MPPT SOLAR CHARGE CONTROLLER
Nominal system voltage: 12/24VDC Auto | Rated charge current: 30A |
Battery input voltage range: 8V~32V | Max.PV open circuit voltage: 100VDC |
Max.PV input power: 12V/390W, 24V/780W | MPP voltage range: V(BAT+2V)~72V |
Working environment temperature: -25℃~+50℃ | Storage temperature range: -35℃~+80℃ |
Grounding: Common negative | Communication: RS485 |
Power Terminals: 6AWG(16mm2) | Enclosure: IP30 |
Dimensions: 228x164x55mm | Weight: 1.2kg |
WARRANTY INFORMATION
Panels: The solar panel itself comes with a 5-year workmanship warranty and a 25-year 85% output warranty.
Solar Charge Controllers: The controller itself comes with a 1-year warranty.
Accessories: 1-year material warranty
This solar kit includes:
2 pcs 100W poly solar panel
30A MPPT charge controller
1 set mounting z bracket
30ft 12AWG PV cable
8ft 8AWG tray cable
Cable entry housing
1 pairs 1Y4 branch connector
User Manual
300W-30A
Solar Starter Kit:300W solar panel kit is fully equipped, and the necessary accessories from input to output are covered in it, which is ideal for novice and customers who are looking for convenience. This solar kit includes 3pcs 100W poly solar panel, 30A charge controller, 3 sets mounting z bracket, 30ft 12AWG PV cable, 8ft 8AWG tray cable, cable entry housing, 1Y3 branch connector.
Ideal Choice for Permanent Installation: Advanced laminated technology and long-lasting ETFE material of 100W polycrystalline solar panel supports high light transmittance, scratch-resistant and easy to clean. And anti-reflection tempered glass and corrosion-resistant aluminum frame reinforces safety and impact resistance, which allows each panel to withstand high wind (2400Pa) and snow loads (5400Pa). Solar panel for homes is perfect for permanent or semi permanent installation.
Monitor & Protect Devices:30A MPPT uses maximum power point tracking technology and automatically regulates charging profiles relative to ambient temperatures, providing the best level of charge in any condition and protecting against over-charge, over-discharge, overload, and short circuit. User programmable for battery types, load control etc, via PC software or remote meter MT-50.
Wide Application & Compatible:Solar panel kit is designed for RV, cabin, rooftop, caravan, shed, greenhouse, boat, back-up and remote power use, which can be connected in parallel for 12V battery charging or in series for 24V battery charging. And compatible with lead acid, AGM, gel, and lithium batteries. 30A MPPT of 300 Watts RV kit allows expansion to 780W in series and 390W in parallel.
Tech Specs
ACOPOWER 100 WATTS POLY SOLAR PANEL
Maximum Power at STC (Pmax): 100W | Open-Circuit Voltage (Voc): 22V |
Maximum Operating Voltage (Vmp): 17.48V | Short-Circuit Current (Isc): 6.21A |
Maximum Operating Current (Imp): 5.72A | Operating Temperature: -40ºC to 85ºC |
Dimension: 1020x670x35mm / 40.2x26.4x1.4 in | Weight: 9.5kg / 20.6 lbs |
ACOPOWER 30A MPPT SOLAR CHARGE CONTROLLER
Nominal system voltage: 12/24VDC Auto | Rated charge current: 30A |
Battery input voltage range: 8V~32V | Max.PV open circuit voltage: 100VDC |
Max.PV input power: 12V/390W, 24V/780W | MPP voltage range: V(BAT+2V)~72V |
Working environment temperature: -25℃~+50℃ | Storage temperature range: -35℃~+80℃ |
Grounding: Common negative | Communication: RS485 |
Power Terminals: 6AWG(16mm2) | Enclosure: IP30 |
Dimensions: 228x164x55mm | Weight: 1.2kg |
WARRANTY INFORMATION
Panels: The solar panel itself comes with a 5-year workmanship warranty and a 25-year 85% output warranty.
Solar Charge Controllers: The controller itself comes with a 1-year warranty.
Accessories: 1-year material warranty
This solar kit includes:
3pcs 100W poly solar panel
30A MPPT charge controller
3 sets mounting z bracket
30ft 12AWG PV cable
8ft 8AWG tray cable
Cable entry housing
1 pairs 1Y4 branch connector
User Manual
400W-40A
Solar Starter Kit:400W solar panel kit is fully equipped, and the necessary accessories from input to output are covered in it, which is ideal for novice and customers who are looking for convenience. This solar kit includes 4pcs 100W poly solar panel, 40A charge controller, 4 sets mounting z bracket, 30ft 12AWG PV cable, 8ft 8AWG tray cable, cable entry housing, 1Y4 branch connector.
Ideal Choice for Permanent Installation: Advanced laminated technology and long-lasting ETFE material of 100W polycrystalline solar panel supports high light transmittance, scratch-resistant and easy to clean. And anti-reflection tempered glass and corrosion-resistant aluminum frame reinforces safety and impact resistance, which allows each panel to withstand high wind (2400Pa) and snow loads (5400Pa). Solar panel for rooftop is perfect for permanent or semi permanent installation.
Monitor & Protect Devices:40A MPPT uses maximum power point tracking technology and automatically regulates charging profiles relative to ambient temperatures, providing the best level of charge in any condition and protecting against over-charge, over-discharge, overload, and short circuit. User programmable for battery types, load control etc, via PC software or remote meter MT-50.
Wide Application & Compatible:Solar panel kit is designed for RV, cabin, rooftop, caravan, shed, greenhouse, boat, back-up and remote power use, which can be connected in parallel for 12V battery charging or in series for 24V battery charging. And compatible with lead acid, AGM, gel, and lithium batteries. 40A MPPT of 400 Watts RV kit allows expansion to 1040W in series and 520W in parallel.
Tech Specs
ACOPOWER 100 WATTS POLY SOLAR PANEL
Maximum Power at STC (Pmax): 100W | Open-Circuit Voltage (Voc): 22V |
Maximum Operating Voltage (Vmp): 17.48V | Short-Circuit Current (Isc): 6.21A |
Maximum Operating Current (Imp): 5.72A | Operating Temperature: -40ºC to 85ºC |
Dimension: 1020x670x35mm / 40.2x26.4x1.4 in | Weight: 9.5kg / 20.6 lbs |
ACOPOWER MIDAS 40A MPPT SOLAR CHARGE CONTROLLER
Nominal System Voltage: 12/24VDC Auto | Grounding: Common negative |
Rated Charge Current: 40A | Battery Input Voltage Range: 8V~32V |
Max. PV Open Circuit Voltage: 100V (1) 92V (2) | Rated charge Power: 520W/12V 1040W/24V |
MPPT Voltage Range: (Battery Voltage+2V) ~72V | RS485 Interface: 5VDC/200mA(RJ45) |
Working temperature: -25℃~+50℃ | Storage temperature: -20℃~+70℃ |
Terminals: Up to 6 AWG | Enclosure: IP33 |
Dimension: 10x7.28x2.67 in / 255×185×67.8mm | Weight: 3.75lbs / 1.7kg |
WARRANTY INFORMATION
Panels: The solar panel itself comes with a 5-year workmanship warranty and a 25-year 85% output warranty.
Solar Charge Controllers: The controller itself comes with a 1-year warranty.
Accessories: 1-year material warranty
This solar kit includes:
4pcs 100W poly solar panel
40A MPPT charge controller
4 sets mounting z bracket
30ft 12AWG PV cable
8ft 8AWG tray cable
Cable entry housing
1 pairs 1Y4 branch connector
User Manual
500W-40A
Solar Starter Kit:500W solar panel kit is fully equipped, and the necessary accessories from input to output are covered in it, which is ideal for novice and customers who are looking for convenience. This solar kit includes 5pcs 100W poly solar panel, 40A charge controller, 5 sets mounting z bracket, 30ft 12AWG PV cable, 8ft 8AWG tray cable, cable entry housing, 1Y2 branch connector, 1Y4 branch connector.
Ideal Choice for Permanent Installation: Advanced laminated technology and long-lasting ETFE material of 100W polycrystalline solar panel supports high light transmittance, scratch-resistant and easy to clean. And anti-reflection tempered glass and corrosion-resistant aluminum frame reinforces safety and impact resistance, which allows each panel to withstand high wind (2400Pa) and snow loads (5400Pa). Solar panel for home is perfect for permanent or semi permanent installation.
Monitor & Protect Devices:40A MPPT uses maximum power point tracking technology and automatically regulates charging profiles relative to ambient temperatures, providing the best level of charge in any condition and protecting against over-charge, over-discharge, overload, and short circuit. User programmable for battery types, load control etc, via PC software or remote meter MT-50.
[Wide Application & Compatible] Solar panel kit is designed for RV, cabin, rooftop, caravan, shed, greenhouse, boat, back-up and remote power use, which can be connected in parallel for 12V battery charging or in series for 24V battery charging. And compatible with lead acid, AGM, gel, and lithium batteries. 40A MPPT of 500 Watts RV kit allows expansion to 1040W in series and 520W in parallel.
Tech Specs
ACOPOWER 100 WATTS POLY SOLAR PANEL
Maximum Power at STC (Pmax): 100W | Open-Circuit Voltage (Voc): 22V |
Maximum Operating Voltage (Vmp): 17.48V | Short-Circuit Current (Isc): 6.21A |
Maximum Operating Current (Imp): 5.72A | Operating Temperature: -40ºC to 85ºC |
Dimension: 1020x670x35mm / 40.2x26.4x1.4 in | Weight: 9.5kg / 20.6 lbs |
ACOPOWER 40A MPPT SOLAR CHARGE CONTROLLER
Nominal System Voltage: 12/24VDC Auto | Grounding: Common negative |
Rated Charge Current: 40A | Battery Input Voltage Range: 8V~32V |
Max. PV Open Circuit Voltage: 100V (1) 92V (2) | Rated charge Power: 520W/12V 1040W/24V |
MPPT Voltage Range: (Battery Voltage+2V) ~72V | RS485 Interface: 5VDC/200mA(RJ45) |
Working temperature: -25℃~+50℃ | Storage temperature: -20℃~+70℃ |
Terminals: Up to 6 AWG | Enclosure: IP33 |
Dimension: 10x7.28x2.67 in / 255×185×67.8mm | Weight: 3.75lbs / 1.7kg |
WARRANTY INFORMATION
Panels: The solar panel itself comes with a 5-year workmanship warranty and a 25-year 85% output warranty.
Solar Charge Controllers: The controller itself comes with a 1-year warranty.
Accessories: 1-year material warranty
This solar kit includes:
5pcs 100W poly solar panel
40A MPPT charge controller
5 sets mounting z bracket
30ft 12AWG PV cable
8ft 8AWG tray cable
Cable entry housing
1 Pair PV T/Y Connectors
1 pairs 1Y4 branch connector
User Manual
600W-50A
6PCS ACOPOWER 100-Watt polycrystalline solar panels can be connected in parallel by branch connectors or connected in series without any connectors;
MPPT Technology: Common negative grounding design. Automatically detect 12V or 24V DC system voltages innovative mppt technology with High tracking efficiency up to 99.5% and Peak. Conversion efficiency of 98%.Common Negative grounding design.
50A MPPT Solar Charge Controller : Easy Monitor and Operate: Multi-function LCD displays system information intuitively. User programmable for battery types, load control etc, via PC software or remote meter MT-50. Compatible with lead acid, AGM, gel, and lithium batteries.Designed for RVs, cabins, homes, boats, back-up and remote power use. The two solar panels can be wired in parallel for 12V battery charging or in series for 24V battery charging.25-year transferable power output warranty on panels and 1-year warranty on rest of the kit components
Tech Specs
ACOPOWER 100 WATTS POLY SOLAR PANEL
Maximum Power at STC (Pmax): 100W | Open-Circuit Voltage (Voc): 22V |
Maximum Operating Voltage (Vmp): 17.48V | Short-Circuit Current (Isc): 6.21A |
Maximum Operating Current (Imp): 5.72A | Operating Temperature: -40ºC to 85ºC |
Dimension: 1020x670x35mm / 40.2x26.4x1.4 in | Weight: 9.5kg / 20.6 lbs |
ACOPOWER 60A MPPT SOLAR CHARGE CONTROLLER
Nominal System Voltage: 12v/24v/36v/48v DC auto work | Grounding: Common negative |
Rated Charge Current: 60A | Battery Input Voltage Range: 8V~32V |
Max. PV Open Circuit Voltage: 150V/138V | MPP voltage range:V(BAT)+2V~108V |
Max. PV input power: 1125W/12V, 2250W/24V, 2812.5W/36V ,4500W/48V | Rated Charge Power : 750W/12V, 1500W/24V, 2250W/36V ,3000W/48V |
MPPT Voltage Range: (Battery Voltage+2V) ~72V | RS485 Interface: 5VDC/200mA(RJ45) |
Dimension:261*216*119mm | Installion Notes:First connect the battery;Then connect the load; Finally connect the solar panel. |
WARRANTY INFORMATION
Panels: The solar panel itself comes with a 5-year workmanship warranty and a 25-year 85% output warranty.
Solar Charge Controllers: The controller itself comes with a 1-year warranty.
Accessories: 1-year material warranty
This solar kit includes:
6pcs 100W poly solar panel
50A MPPT charge controller
6 sets mounting z bracket
30ft 12AWG PV cable
8ft 8AWG tray cable
Cable entry housing
2 pairs 1Y4 branch connector.
User Manual
800W-60A
Solar Starter Kit:800W solar panel kit is fully equipped, and the necessary accessories from input to output are covered in it, which is ideal for novice and customers who are looking for convenience. This solar kit includes 8pcs 100W poly solar panel, 60A charge controller, 8 sets mounting z bracket, 30ft 12AWG PV cable, 8ft 8AWG tray cable, cable entry housing, 2 pairs 1Y4 branch connector.
Ideal Choice for Permanent Installation: Advanced laminated technology and long-lasting ETFE material of 100W polycrystalline solar panel supports high light transmittance, scratch-resistant and easy to clean. And anti-reflection tempered glass and corrosion-resistant aluminum frame reinforces safety and impact resistance, which allows each panel to withstand high wind (2400Pa) and snow loads (5400Pa). Solar panel for rooftop is perfect for permanent or semi permanent installation.
Monitor & Protect Devices:60A MPPT uses maximum power point tracking technology and automatically regulates charging profiles relative to ambient temperatures, providing the best level of charge in any condition and protecting against over-charge, over-discharge, overload, and short circuit. User programmable for battery types, load control etc, via PC software or remote meter MT-50
Wide Application & Compatible:Solar panel kit is designed for RV, cabin, rooftop, caravan, shed, greenhouse, boat, back-up and remote power use, which can be connected in parallel for 12V battery charging or in series for 24V battery charging. And compatible with lead acid, AGM, gel, and lithium batteries. 60A MPPT of 800 Watts RV kit allows expansion to 750W/12V, 1500W/24V, 2250W/36V, 3000W/48V.
25-year Power Output Warranty:We offer a 25-year transferable power output warranty on solar panels and 1-year warranty on rest of the kit components. ACOPOWER solar panels are factory-automated production without manual participation, so the probability of damage is low. If the panel you received is damaged due to transportation, please contact us as soon as possible.
Tech Specs
ACOPOWER 100 WATTS POLY SOLAR PANEL
Maximum Power at STC (Pmax): 100W | Open-Circuit Voltage (Voc): 22V |
Maximum Operating Voltage (Vmp): 17.48V | Short-Circuit Current (Isc): 6.21A |
Maximum Operating Current (Imp): 5.72A | Operating Temperature: -40ºC to 85ºC |
Dimension: 1020x670x35mm / 40.2x26.4x1.4 in | Weight: 9.5kg / 20.6 lbs |
ACOPOWER 50A MPPT SOLAR CHARGE CONTROLLER
Nominal System Voltage: 12v/24v/36v/48v DC Auto | Grounding: Common negative Design |
Rated Charge Current: 50A | Battery Input Voltage Range: 8V~68V |
Max. PV Open Circuit Voltage: 150V/138V | Rated charge Power: 625W/12V 1250W/24V 1875W/36V 2500W/48V |
MPP Voltage Range: V(BAT)+2V~108V | Battery type :Sealed(Defalut)/Gel/Flooded/User. Lead-acid batteries and Lithium-ion batteries |
Working temperature: -25℃~+50℃ | Storage temperature: -20℃~+70℃ |
RS485 Interface: RS485(RJ45) | Enclosure: IP33 |
Dimension: 261*216*119mm | Terminals: 16mm2/6AWG |
WARRANTY INFORMATION
Panels: The solar panel itself comes with a 5-year workmanship warranty and a 25-year 85% output warranty.
Solar Charge Controllers: The controller itself comes with a 1-year warranty.
Accessories: 1-year material warranty
This solar kit includes:
8pcs 100W poly solar panel
60A charge controller
8 sets mounting z bracket
30ft 12AWG PV cable
8ft 8AWG tray cable
Cable entry housing
2 pairs 1Y4 branch connector.
User Manual
Shipping
Thank you for visiting and shopping at ecopowerit.com. aims to offer you the best shipping options.
Shipment processing time
All orders are processed within 3-5 business days. Orders are not shipped or delivered on weekends or holidays.
If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in the shipment of your order, we will contact you via email.
Shipment to P.O. boxes or APO/FPO addresses
ecopowerit.com ships to addresses within the U.S., some of U.S. Territories (Please consult Sales@ecopowerit.com before ordering) and does not ship to P.O. Box and APO/FPO/DPO addresses.
Shipment confirmation & Order tracking
You will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 24 hours.
Damages
ecopowerit.com is not liable for any products damaged or lost during shipping. If you received your order damaged or lost your package, please contact us within 20 days at info@ecopowerit.com.
After-sale Service Contact
- 916-658-3961
Warranty, Return & Registration
Click here to check Warranty, Return & Registration